Posts tagged with RB6

AVID Kyosho HD long rear axle conversion & shock & turnbuckle tool

AVID RC have re-released and improved their HD long rear axle conversion set, and shock and turnbuckle tool for Kyosho RB6.6, RB6, RB5, ZX-6, ZX-5, SC, and SC6. First up is the HD long rear axle conversion set. AVID engineers shouted “Enough!” after witnessing one too many Kyosho rear axle failures. They went into the lab and studied the […]

JConcepts RB6 series Aero front wings

JConcepts have introduced new Aero narrow and wide front wings for the Kyosho Ultima RB6 and RB6.6. Aerodynamics is a key point on any vehicle and in particular, 1/10th off-road vehicles. A drivers aero package consists of the vehicle type, body style and finally the finishing touch, the front wing. JConcepts regularly experiments with aero […]

Kyosho RZ6 conversion set

See: Kyosho America Kyosho has unveiled the first official images of the conversion set intended to convert the RB6 in RZ6. The RZ6 is somehow the “carpet” version of the RB6, the same 2wd mid motor buggy that was used by Jared Tebo at the 2015 IFMAR World Championship held in Japan. With its shaft drive the RZ6 is efficient in medium to high […]

JTP RC launches RB6 & ZX6 carbon race options

See: JTP RC Jared Tebo has just introduced a new series of carbon fibre parts developed for his ‘JTP RC’ brand for Kyosho RB6 and ZX6 vehicles. Front and rear shock towers are available for the RB6. The front shock tower give a better front end feeling through the corners and over obstacles by improving the up […]

Kyosho mid-motor RB6 3-gear Conversion Kit

While attending a recent race, we found ourselves chatting with a local Kyosho RB6 mid-motor buggy owner, Jason McClarrinon, who was searching for a 3-gear transmission setup. Unable to find a conversion, he created one. The conversion quickly took off in popularity, and is now available for sale nationwide. Fellow racers have said the 3-gear […]

Vision Racing cuts new 5mm carbon fiber RB6 front tower

See: Vision Racing Vision Racing has released their newest option part today, catering to the Kyosho RB6 2wd buggy. This is a 5mm thick carbon fiber shock tower which incorporates micro tune shock positioning by adding two ‘in between’ holes to the three stock positions. The tower can also be raised 2mm using the second mounting position. […]

HIRO introduces Ti screw kits for Kyosho 1/10 lineup

See: HIRO SEIKO Taiwanese screw gurus, HIRO SEIKO, have announced their latest screw kits for the Kyosho 1/10 lineup. HIRO now offers Titanium screw kits for the RB6 rear motor, RB6 mid-motor, and Lazer ZX6 platforms. The screw kits range from 88 to 118 pieces (depending on the car), and shave off as much as […]

Mckune Design straps down the RB6 and B5M

Mckune Design have just released their new line of carbon fiber battery braces for the Kyosho RB6 and Associated B5M. The RB6 Cross brace allows racers to modify the chassis and mount a shorty battery sideways without compromising the stiffness of the chassis. The Inline B5M battery brace provides secure mounting of an inline battery […]