Posts tagged with MP9 TKI4

T-Work’s TKI3/4 brake cams

See: T-Work’s Products T-Work’s have introduced new brake cams for the Kyosho MP9 TKI3 and TKI4. machined from high-quality aluminium, the brake cams are finished with a hard coated surface treatment for wear and extra durability.

T-Work’s MP9 TKI3/4 aluminium wheel hubs

See: T-Work’s Products T-Work’s have introduced new aluminium wheel hubs for Kyosho MP9 TKI4 and TKI3. machined from 7075 T6 aluminum, they come black anodised for wear and laser engraved for easy identification. They are available in a set of four standard offset hubs and also in a set of two +1mm offset hubs. These wheel hubs […]

T-Work’s MP9 TKI4 aluminium & brass lower suspension mounts

See: T-Work’s T-Work’s have introduced new aluminium and brass lower suspension mounts for the Kyosho Inferno MP9 TKI3/4. Machined from high-quality 7075-T6 aluminium or brass, these FF, FR, RF and RF low mounts come hard-black anodised and laser etched in silver (aluminium) or gold (brass). They allow you to fine-tune the weight distribution by using a […]

T-Work’s MP9 TKI4 aluminium option parts

See: T-Work’s T-Work’s have introduced new aluminium option parts for the Kyosho MP9 TKI3/4 in the form of front and rear shock towers and front upper suspension mount. The options parts are machined from high-quality 7075-T6 aluminium and come hard coated, black anodised and laser-etched. The rear shock tower uses stock geometry while the front shock […]

T-Work’s MP9 TKI4 aluminium shock standoff set

See: T-Work’s T-Work’s have introduced a set of aluminium shock standoffs for Kyosho MP9 TKI3 and TKI4. They are made from 7075-T6 aluminum with a nut as the base to easily install them. The shock standoffs come hard coated for durability and weigh less than the stock steel standoffs. The set includes four standoffs and mounting […]

Under the Hood: MP9 TKI4 Elliott Boots

Elliott Boots, 24 – UK Chassis: Kyosho MP9 TKI4 Engine: WRX corsa lunga Fuel: MLC Fuel Tyres: Pro-Line Radio & Servos: Sanwa Body & Wing: Stock Event: The Neo Race 2018, Spain    

PSM MP9 TKI4 aluminium shock standoff set

See: PSM PSM have introduced a set of aluminium shock standoffs for the Kyosho MP9 TKI4. These lightweight shock standoffs are machined from 7075-T6 aluminium and hard coated for wear. The parts sport a special design with the flat-width moved to the center of the standoff to provide easier access for tightening. For the smoothest […]

T-Work’s MP9 TKI4 rear tension rod

See: T-Work’s T-Work’s have introduced a rear tension rod for the Kyosho MP9 TKI3 and TKI4. The tension rod is connected to the rear bulkhead and chassis, and is used to stiffen the chassis. The set includes the chassis brace and all the necessery hardware for the assembly.