Popular

Quick Links

News Catch Up
Most Commented
Popular Posts
News Categories
News Tags
Like on Facebook Follow on twitter subscribe on YouTube Follow on Instagram Subscribe to NeoBuggy RSS
event

Posts tagged with MP9 TKI3

Kyosho MP9/10 Big Bore shock springs

See: Kyosho Europe Kyosho have introduced three new sets of Big Bore shock springs for the Inferno MP9 series and MP10. These springs are made with a smaller 1.5 diameter wire, compared to the original springs that used 1.6 wire. Available in 70mm for the front and 81mm and 85mm for the rear, the red front […]

T-Work’s MP10 & RC8B3.1 connector-style switches

See: T-Work’s Products T-Work’s have introduced two new connector-style switches for the Kyosho Inferno MP9 TKI3, TKI4 and MP10 as well as the Team Assoicated RC8B3.1. The switch is mounted on a carbon fibre plate and uses a jumper wire. The plate comes pre-soldered with JR-style connectors for the receiver and battery wire while the switch is […]

T-Work’s introduce new Hyspin ball bearing sets

See: T-Work’s Products T-Work’s have introduced a six new sets of Hyspin ball bearings for popular 1/8th buggies, E-buggies and Truggies on the market. Featuring both rubber and metal shields, the Hyspin ball bearings offer good combination between reduced drag and great durability. The Hyspin ball bearings are available in set of 24-piece for the Kyosho Inferno […]

T-Work’s MP10 & MBX8 HC shock cap set

See: T-Work’s Products T-Work’s have introduced two new hard coated aluminium upper shock caps sets for the Kyosho Inferno MP10, MP9 TKI3/TKI4, MP9e and MP9e EVO as well as the Mugen Seiki MBX8, MBX7, MBX7R and MBX8 Eco. Machined from high-quality 7075-T6 aluminium, the parts come hard-coated for wear. Each set includes 4 shock caps, 2 type […]

T-Work’s MP9/10 30mm lightweight brake discs

See: T-Work’s Products T-Work’s have introduced new 30mm lightweight brake discs for the Kyosho MP10 and the MP9 TKI4 and TKI3. Machined from high-quality aluminium, the 30mm discs have been strategically lightened compared to the standard parts and they sport also a vented design for efficient heat dissipation. The 30mm lightweight brake disks come in sets of […]

T-Work’s MP9 alu front upper arm mount

See: T-Work’s Products T-Work’s have introduced new aluminium front upper arm mount for Kyosho MP9 TKI3/4 and MP9e EVO. The part is machined from high-quality 7075 aluminium, black anodised with silver edges and with laser engraved T-Work’s logo for looks. The upper arm mount allows to adjust the front roll center of the buggy.

T-Work’s MP9 TKI4 & MBX8 DLC coated arm shafts

See: T-Work’s Products T-Work’s have introduced new DLC coated front lower arm, front upper arm and rear lower arm shafts for the Kyosho MP9 TKI3/4 and Mugen Seiki MBX7R/8. The arm shafts are DLC coated for wear and provide a smooth and slick surface. The front lower arm shafts measure 4×64.5mm for MP9 and 4×63.3mm for MBX7/8, […]

T-Work’s MP9 TKI3/4 & MBX7/8 DLC coated shock shafts

See: T-Work’s Products T-Work’s have introduced new DLC coated shock shafts for the Kyosho MP9 TKI3/4 and Mugen MBX7/8. The Kyosho front shocks (53mm) and rear (63mm) shocks and Mugen front (59.7mm) and rear (67.6mm) shocks are made high quality steel and come DLC coated, the same surface treatment used with crankshafts, ensuring minimal wear, corrosion resistance […]