Posts tagged with Inferno MP9 TKI4

Kyosho MP9/10 Big Bore shock springs

See: Kyosho Europe Kyosho have introduced three new sets of Big Bore shock springs for the Inferno MP9 series and MP10. These springs are made with a smaller 1.5 diameter wire, compared to the original springs that used 1.6 wire. Available in 70mm for the front and 81mm and 85mm for the rear, the red front […]

T-Work’s MP10 & RC8B3.1 connector-style switches

See: T-Work’s Products T-Work’s have introduced two new connector-style switches for the Kyosho Inferno MP9 TKI3, TKI4 and MP10 as well as the Team Assoicated RC8B3.1. The switch is mounted on a carbon fibre plate and uses a jumper wire. The plate comes pre-soldered with JR-style connectors for the receiver and battery wire while the switch is […]

T-Work’s MP9 TKI4 hardcoated aluminium chassis

See: T-Work’s T-Work’s have introduced a black hard coated aluminium chassis for the Kyosho Inferno MP9 TKI4. CNC machined from 7075-T6 aluminium the chassis also features machined pockets to reduce weight and comes with a stainless steel rear chassis skid plate.

T-Work’s TKI4 brass front knuckle & rear hub weight set

See: T-Work’s T-Work’s have introduced front and rear brass carrier weights for the Kyosho Inferno MP9 TKI4. These outboard type weights are secured to the rear hub and knuckles with a set screw and add 5g, 10g or 15g of unsprung weight to the outer end of each suspension arm. These weights will help improve overall […]