Posts tagged with B6D

RPM B6 & B6D “Flat” front A-arms

See: RPM R/C products RPM have introduced new “Flat” front A-arms for the Team Associate B6 & B6D. Thanks to the hinge-pin holes held to extremely strict tolerances, the “Flat” front A-arms are an improvement compared to stock A-arms. Also RPM use in-line screws to retain the outer hinge pins while they ditch the inside […]

Team Associated B6 slim profile front wheels

Coming from Team Associated and made for the B6 and B6D are slim front wheels. They are designed for use with all popular carpet and AstroTurf(TM) surface tyres and features the same offset as the popular #9691 and #9690 2WD front wheels, only with an optimized profile. The wheels are textured on the gluing surface […]

Team Associated B6 & B6D FT rear aluminum hubs

Team Associated have introduced the new Factory Team aluminum rear hubs for the B6 and B6D. Machined from high quality aluminum, the rear hubs are Factory Team blue anodized with laser etching to denote left and right sides. These optional parts offer the ability to run 67mm CVA bones for increased rear support under lower […]

RPM B6/B6D rear bumper & skid plate

See: RPM R/C products RPM have introduced a rear bumper and skid plate for the Team Associated B6 and B6D. The rear bumper is tiny and extremely lightweight, yet will become the most valuable piece of equipment on your ride the first time that out-of-control guy slams into your backside! It weighs in at a minuscule […]

RDRP B6 aluminium C & D suspension mounts

See: RDRP Revolution Design Racing Products have introduced their new C and D aluminium arm mounts for the Team Associated B6 and B6D. The suspension hangers are direct replacements for the kit parts and they add valuable toughness especially when running in demanding track conditions or when competing in modified classes. Machined from aircraft-grade 7075-T6 […]

Team Associated B6/B6D chassis protective sheet

Team Associated have introduced a chassis protective sheet for the B6 and B6D. Whether you race indoor or outdoor, protecting and adding durability to your chassis is practically a necessity. Made from highly durable 18 mil vinyl with an aggressive adhesive, it is perfectly cut to fit your B6 or B6D and includes two extra […]

Team Associated B6 transmission & bulkhead shim set

Coming from Team Associated and made for the B6 and B6D is the transmission/bulkhead shim set. The front bulkhead shims are designed to be use between the chassis and front bulkhead to lower front roll center. They provide a smoother steering response and increases mid-corner steering. The rear bulkhead shims are made to be use […]

THR B6 thumb nuts, bulkhead shims & under LiPo weight

See: THR UK based THR have introduced three option parts for the Team Associated B6 and B6D. First up are the M3 thumb nuts for securing Lipos. They are made from turned stainless steel with knurled edge to make easy to grip and are 12mm Diameter and a low profile 3mm high. Simple and elegant, […]