Posts tagged with Anti-roll bars

Kyosho MP10 balance weights & anti-roll bars

See: Kyosho Europe Kyosho have introduced new balance weights and anti-roll bars for the Inferno MP10. First up are the front and rear balance weights. Available in 10g and 20g, they come hard-coated for wear and laser-engraved for easy identification. Their specific shape matched to the chassis for a perfect fit while their slotted adjustable design […]

HB Racing D8 series anti-roll bar sets

See: HB Racing HB Racing have introduced two new sets of anti-roll bars for the D817V2 and D817T. They give racers a finer range of stiffness to help tune the car to track conditions. The front sway-bar set has 2.3mm and 2.5mm bars, and the rear sway-bar set has 2.5mm and 2.7mm bars, each labeled with a […]

XRAY XB8 front & rear anti-roll bars

XRAY have added new front and rear anti-roll bars to their range of anti-roll bars for the XB8 and XT8. They are made from premium heat-treated spring steel material and laser-engraved for easy identification. These anti-roll bars are available in 1.6mm, 1.8mm and 2.0mm thick for the front and 1.8mm and 2.0mm thick for the […]

Serpent Spyder SDX4 front & rear anti-roll bars

Serpent have introduced the ful range of front and rear anti-roll bars for the Spyder SDX4. All anti-roll bars are made from high quality spring steel material, black coated and laser engraved for easy identification. The anti-roll bars will help to fine-tune the suspension for a range of traction conditions. They come in 1.0mm, 1.2mm, […]

New XB4 Anti-Roll Bars

New XB4 Anti-Roll Bars

Pictured below is Xrays latest release for the XB4. These anti-roll bars offer different anti-roll stiffness adjustment so that you can fine-tune the set-up of your chassis with maximum finesse. For easy recognition the bars have laser-engraved stripes, to indicate bar thickness. Available for the front and rear of the kit!

Anti-roll bars from Serpent

Serpent have released some trick anti roll bars which allow you to switch out & try different wire thicknesses very easily. Marchined from Serpent spring steel the anti-roll bar shaft fits into the ball raced holders with the straight roll bar wires fitting into the shaft’s slots via alu holders fastened with grub screws. See www.Serpent.com