Quick Links

News Catch Up
Most Commented
Popular Posts
News Categories
News Tags
Like on Facebook Follow on twitter subscribe on YouTube Follow on Instagram Subscribe to NeoBuggy RSS

Options News

XRAY XB4 81mm ECS front driveshafts


XRAY have introduced the new 81mm ECS front driveshafts for the XB4. The unique ECS driveshafts with 2.5mm pin equalize the speed between the drive shaft and the wheel. With a unique 2-piece joint between the axle and the wheel, the same extreme wheel turning angle is divided into two shallower angles without joint binding. This means that at the same cornering speed, the inner wheel will not bind or vibrate. Drive through the corner is more stable, more precise, and easier to drive. The ECS Drive Shafts help also with improved landing after jumps. With the ECS driveshafts, wheel vibrations and noise are decreased to minimum, steering is increased, stability of the car is increased and cornering speed and smoothness are noticeably increased as well.  

Pilot R/C carbon fibre ball stud washer set

See: Pilot R/C Products

Pilot R/C Products have introduced new carbon fibre ball stud washer set. The fully carbon fibre washers feature a 3mm inner diameter with a 7.8mm outer diameter and come in the following thicknesses: 0.5mm, 1.0mm and 2.0mm. The carbon fiber ball stud washers are an upgrade over their plastic and aluminum counterparts because they won’t tweak or flatten under pressure while remaining the lightest possible mass for the application, not to mention the exposed carbon finish for that true factory look. This makes them great for precisely adjusting the height of your ball studs when adjusting your roll center, adjusting your wheelbase, shimming suspension components and much more. The set comes with ten washers for each thickness, equaling thirty washers total.

HUDY brushless 40mm & 30mm fans

HUDY have introduced two new brushless 40mm and 30mm fans. These fans are extremely reliable and designed to improve electronics cooling.The fans feature solder tabs for quick and easy cable replacement. They have a brushless design, are bearing equipped, and come with a 170mm cable.


Another photo here

175RC XB2 aluminum nuts, washers, serrated nuts & hub spacers

See: 175RC

175RC have introduced new aluminum nuts, ball stud washers, serrated wheel nuts and hub spacers for the XRAY XB2, XB4 and XT2. All parts are made in aluminium to shed some weight and come in orange colour. First up is the aluminum nut kit including 10pcs with M3 nuts and 1pc. M4 nut for the slipper. Next up is are the M3 ball stud washers perfect for the driver that knows small adjustments make a huge difference. Used for adjusting roll center or shimming suspension components, this aluminum washer set includes four of each thickness per package (0.5, 1, 2, 3mm).

Continue reading here

Pro-Line 1/10 buggy & truck chassis protectors

Pro-Line chassis protectors

See: Pro-Line

Pro-Line introduces new chassis protectors pre-cut for the team Associated B44.3 and B5M, TLR 22 3.0 and an universal clear chassis protector for 1/10 buggy and truck. The Pro-Line chassis protectors are extra thick at 0.5mm (0.020”). They are available in Team style with blue, white and black just like Pro-Line’s iconic Box Van and  black with subtle gray P-L logos fading to black that will fit in with any paint scheme. The Pro-Line chassis skin are manufactured by Upgrade RC graphics for Pro-Line, so you can be confident that you are getting the very best quality.

More photos here

VRP “GameChanger” pistons


See: VRP

VRP presents the latest evolution of their XV2 piston and the Quick Rebound System, the “GameChanger” shock pistons.

Rebound System:

First we started with our XV2 Piston and the Quick Rebound System it has. It was important to keep the exact function of that system because its proven track performance and obvious ease of understanding. The Rebound Valve has been re-designed and updated to be smaller and use less of the inner thickness of the piston to improve durability. This minimization was also needed to fit another ‘system’ into a small part like a piston.

Continue reading here

Kyosho RZ6 conversion set

Kyosho RZ6 conversion set 1

See: Kyosho America

Kyosho has unveiled the first official images of the conversion set intended to convert the RB6 in RZ6. The RZ6 is somehow the “carpet” version of the RB6, the same 2wd mid motor buggy that was used by Jared Tebo at the 2015 IFMAR World Championship held in Japan. With its shaft drive the RZ6 is efficient in medium to high bite tracks. The set consists many parts such as the new aluminum chassis, the drivetrain and motor mount parts and the new body. Available in Europe.

More photos here

Factory Team RC8B3 alu servo horns

Factory Team RC8B3 aluminum servo horns neo

See: Team Associated

Team Associated introduces new aluminum servo horns designed for the steering servo in the RC8B3, RC8B3e, RC8T3, and RC8T3e. These aluminum servo horns are machined from 7075 T6 aluminum, laser etched spline size and equipped with large m2.5 screw for clamping. They are stronger than the stock plastic ones that come with most servos and due to the slightly shorter length, they provide a smoother steering feel while decreasing the load on the servo. Available in 23T (fits Airtronics, JR, KO, and Spektrum servos) and 25T (fits XP Digital, Reedy, Futaba, Savox, and newer-style Hitec servos).

More photos here