Popular

Quick Links

News Catch Up
Most Commented
Popular Posts
News Categories
News Tags
Like on Facebook Follow on twitter subscribe on YouTube Follow on Instagram Subscribe to NeoBuggy RSS
event

Schelle Racing Innovations News

Schelle B6 67mm conversion HD axles

Coming from Schelle Racing Innovations and made for the Team Associated B6 are the 67mm conversion HD axles. The conversion HD axles are for B6 racers that want to run latest “long bone” setups. The 67mm conversion axles work with aluminum rear hub units by Schelle (B5M and B6) and Team Associated (B5M). The Schelle axles replace the kit units and keep the same overall track width. An extra set of 65mm bone cross pin holes (2mm closer to car centerline) allow for tuning back and forth between the 2 lengths of CVA. The long 67mm bones can move through the range of suspension travel with less angle mis-alignment. This translates to less bind on power and more rear grip as the suspension works under load instead of locking out due to the drivetrain.

See: Schelle Racing Innovations

Click for Features & photos

Schelle B64/D aluminum rear hubs

Coming soon from Schelle Racing Innovations are the aluminium rear hubs for the Team Associated B64 and B64D. The 2-piece design with replaceable caps increases adjustment and durability. The Schelle B64 hubs fit the kit axle height inserts for 0, +1, +2, and +3 adjustability. The standard location “inside, +1mm shim” matches the kit standard upper row middle “B” hole. The upper cap design can space away from the main hub with ballstud shims, allowing racers fine “in-between” adjustments for the rear upper link.

See: Schelle Racing Innovations

Continue reading here

Schelle B6 & B64 V2 shock pistons

Schelle Racing have introduced 2 new V2 piston pairs for the Team Associated B6 and B64. First is the 2 hole split 1.6 and 1.7, commonly used in 2wd front to gain more steering indoors. Also for the 2wd or 4wd rear, the 3×1.5 Bevel Piston is a perfect complement to 3×1.4 front pistons in bumpier conditions. These 2 new pistons plus the other 6 go-to sizes are included in the new Schelle Tuning Set of 8 pair screw-on type V2 pistons (fits B6, B6D, B64, B64D). The set also fits screw-on V2 shock shafts which are upgrades for B5, B5M, B5M Factory Lite, T5M, and SC5M.

See: Schelle Racing Innovations

Continue reading here

Schelle B64 carbon gearbox shims

Schelle Racing Innovations have introduced carbon gearbox shims for the Team Associated B64. Made from 1mm thickness carbon fiber strategically cut-out to prevent backwards differential installation, these shims fit in between the B64 gearbox and chassis and raise the gearbox and suspension mounts up higher as a tuning option. The gearbox shims work on rear suspension only and you can stack 2 for 2mm. The use gives more support in turns, a higher roll center and makes the rear more responsive and more entry and mid-corner steering.The B64 carbon gearbox shims package come with 2 pcs to tune 1mm or 2mm height change.

See: Schelle Racing Innovations

Schelle release new B6 & B64 option parts

Schelle Racing Innovations have introduced several new option parts for the Team Associated B6 & B64. First up is the carbon fiber battery strap for the B64 and B64D. Machined from 2.5mm routed premium USA-made carbon fiber, its design does away with the slanted look of the kit plastic part and adds a complimentary design that runs parallel to the centerline of the pack. The Schelle design also has a slot for balance port access on the battery packs. it allows to use the kit mounting hardware or replace the kit parts with flat head M3 screws for the low-profile look.

See: Schelle Racing Innovations

Continue reading here

Schelle B64 Onyx & Ceramic bearing sets

Schelle Racing Innovations have added three bearing set for the all new Team Associated B64. First is the Onyx series 22 pcs. set for kit replacement, second, for the “spare no expense” crowd, the Black Diamond ceramic bearings are offered as a 10 pcs. B64 gearbox set or an 18 pcs. complete car set (gearboxes and all 4 axles).

See: Schelle Racing Innovations

Continue reading here

Schelle B6 Extreme 5mm gull tower

Schelle Racing Innovations have introduced the Extreme 5mm gull tower for the Team Associated B6 and B6D. The B6 Extreme gull tower is intended to be the most durable carbon fiber front tower on the market, with premium 5mm carbon fiber made in the USA. Schelle removed the 2 outer holes, shortened the ears to reduce leverage so this tower and added  option holes for Schelle upper wing mount.

See: Schelle Racing Innovations

More photos here

Schelle B64 upper titanium screw set

Schelle Racing Innovations have introduced a upper titanium screw set for the Team Associated B64. Schelle premium Titanium screws are made of Grade 5 Titanium Alloy (commonly known as 6Al-4V) with a bright machined finish to give your car that pure racing look. Unlike Grade 2 known to be used by other brands, the Grade 5 Titanium alloy is the most desirable, giving 40% lighter weight and corrosion resistance compared to steel.

See: Schelle Racing Innovations

Continue reading here