03 June 2013 18:53 by KevinR
Team Losi Racing driver Dakotah Phend attended the Pro-Line King of Kings Race at Stateline in Fremont, Indiana over the weekend. There was a late start due to rain but everyone ended up getting in two qualifiers on Saturday and a qualifier and the mains on Sunday. Dakotah TQ’d and won Nitro Buggy with his Team Losi Racing 8IGHT 3.0, Nitro Truggy with his Team Losi Racing 8IGHT-T 2.0, and E-Truggy with Orion engines and Pro-Line M3 Blockades and M3 Holeshots. Team Losi Racing swept the podium in all three classes with Team Losi Racing driver Dylan Gerard 2nd in Nitro Buggy (1st in E-Buggy) and Team Losi Racing driver Mike Sontag 2nd in E-Truggy and 3rd in Nitro Truggy.
20 May 2013 07:08 by KevinR
Based off of the incredibly successful V1 Suburbs design, the Proton achieves improved performance and durability on a wider range of track surfaces. Indoor 1/10 scale Off-Road racing has taken off around the world but the traction conditions can vary wildly from loose and dusty to super wheelie traction. The V1 Suburbs performs exceptionally well at tracks with pure clay and medium to high traction and the Proton eclipses its predecessor by providing more forward grip and being easier to drive. The Proton features the same low tread found in the V1 Suburbs but the tread is thicker front to back and is more spaced out for improved performance on loose and low traction indoor surfaces.
19 April 2013 10:15 by KevinR
Pro-Line is pushing the limit of body development by providing a pre-Painted and Partially Trimmed/Stickered Short Course body to get you to the track faster than ever before! This is a Pro-Line made body with clear windows that has been hand painted by the Pros! The first Pro-Line body to receive this treatment is the Flo-Tek body: Introducing the first SC body specifically designed to minimize the short-course body parachute effect!
19 April 2013 09:01 by Phil
Pro-Line has a new and improved BullDog design that adds enhancements that will make you go faster! The new MBX-7 Gen 3 Bulldog features a larger and higher swoop on the front side panels for more front down-force. The rear section of the roof has been angled off dramatically for a fresh new look and to allow more air to get to the cooling fins on the motor.
The Gen 3 Bulldog also has a raised rear section behind the motor to increase the balance of traction front to rear for more traction on any surface. Get the most advanced body for your MBX-7: Release the BullDog Gen 3!
Part #3406-00 | See www.ProLineRacing.com
19 April 2013 06:44 by Phil
To commemorate their 30th year in business,Pro-Line have released a special edition T-Shirt to celebrate the occasion – available in grey and blue.
This is a 30th Anniversary Gray T-Shirt. Pro-Line has a new T-Shirt commemorating our 30th Anniversary of creating Top Performing RC Products that make you go faster! This is a must have Special Edition T-Shirt for all of the Pro-Line fans around the World. Get yours today!
20 March 2013 14:57 by KevinR
Pictured below are Pro-Lines latest pre-painted shells which include the Flo-Tek body and the Flo-Tek Ford F-150 Raptor SVT. Pro-Line state that these are not some silk-screened China made knock-offs with blacked-out windows. These are Pro-Line made body’s with clear windows that have been hand painted by the pros! Further details can be found here.
20 March 2013 14:50 by KevinR
Pro-Line is very excited to announce the availability of the Trencher X SC pre-mounted to the wheel that you need. They take the guess work out of your glue job by doing the mounting for you so you can spend your time having fun! You will never tread lightly with your Short Course (SC) Truck again with Pro-Line’s new Trencher X SC tyres. The Trencher tyres are designed to give your short course truck optimal traction on just about any surface. Realistic shaped treads give your short course truck a scale look while offering ridiculous amounts of forward bite. The tall tread will also offer traction in many different terrains and deliver durability that is second to none. The Trencher X improves on the original with extra width and even more stump pulling traction!
20 March 2013 14:39 by KevinR
The ION proved electrifying from the start, taking the win the first time it touched the track! The ION was designed from the ground-up to be the ultimate front tyre requiring zero break-in period and ground breaking performance! The ION fits perfectly in Pro-Line’s line-up of 2WD front tyres because it provides more steering than the Scrubs and less steering than the Suburbs, giving you the option to choose the perfect tire for your current track condition! The unique molecular structure tread design provides unbelievable high-speed and low-speed steering that provides the correct balance and feel that racers are looking for.
20 March 2013 14:34 by KevinR
Pro-Line has announced the release of their new HD BullDog clear bodyshell for the D812, RC8.2, 8ight E 2.0, B4.2 and Losi 22… Pro-Line went all-out for the World Championships in Argentina with a special High Down-Force BullDog body for the unique track conditions. Every effort on the HD BullDog was made to improve the rear Down-Force and add high-speed stability, which improve lap times significantly on tracks with a long straight-away and few jumps.
Large vertical fins extend out of the roof line and air channels extend over the length of the body to achieve maximum straight line stability. The rear portion of the HD BullDog features a scooped spoiler that provides the improved Rear Down-Force, giving your buggy a more balanced and stable feel at high-speeds.
13 March 2013 08:07 by KevinR
New to the 1/10th calendar for 2013 is the inaugural Pro-Line Challenge at the fantastic RHR Dirt venue, Worksop, England. Due to take place on the 18th & 19th May the exciting format will feature bump up finals for something a little different! The control tyre for driven axles is the Pro-Line Holeshot, see the below entry form for additional details.