See: Team Losi Racing

Team Losi Racing have introduced the new 8IGHT-X/XTE Truggy kit. The new Team Losi Racing 8IGHT-XT Next Generation Truggy builds on the championship-winning heritage of its predecessors with updates to the suspension geometry and drivetrain as well as the chassis layout that make it both easier to drive and tougher to beat. Plus, it includes Nitro and Electric in one box! The 8IGHT-XT/XTE has a combination of features second-to-none including large footprint engine mount, 3mm chassis, cab forward body, machined aluminum shock caps, and so much more.

The 8IGHT-XT/XTE Next Gen suspension geometry has been completely revamped making a truck that is fast, nimble, and easy to drive. This includes a myriad of updates including wider front pivot with less scrub radius, narrower rear pivot, longer front and rear arms, and updated hub offset. All new suspension arms have been designed to accept stiffener plates that will allow racers to tune the flex of the suspension. The kit will include molded plates with optional carbon fiber plates available separately.

Chassis width has been increased to aid in stability and give the truggy a more neutral feel as well as equalized side to side for equal torsional flex and thinned down to 3mm for weight savings. New chassis side guards that have an improved fit onto the chassis. The internal pinion bearing size in the front and rear has been increased for added durability.

Lightweight large footprint engine mount that reduces flex underneath the engine to eliminate chassis fatigue on high traction race surfaces for nitro. One piece aluminum motor mount that is easy to adjust pinion sizing for electric motors. 17.5 deg caster blocks that allow the height of the spindle to be adjusted. All four corners of the vehicle have been updated to use large ball bearings and the same bearings.

The weight has been moved forward in the chassis to provide a better driving balance to the vehicle and less parts needed to carry. Redesigned steering rack which will allow more ackerman adjustments and an improved servo saver to eliminate bellcrank bind during high loads. Redesigned machined 7075-T6 aluminum shock towers with updated camber link holes.

The front and rear diff case have been altered to allow easier access to the differentials without removing the bulkheads from the vehicle. New sway bar system that has adjustable length links to allow better equalization of each side of sway bar as well as collars that keep the sway bars centered. The 8IGHT-X shocks are optimized and lightened to decrease the center of gravity and lower the weight of the car. Machined aluminum shock caps with threaded bleeder holes for easy and consistent bleeding of oil.

The throttle and brake actuator uses ball bearings in order to give a super smooth feel on the throttle. An updated radio tray now puts the throttle servo near the engine to eliminate additional linkage. The updated radio tray will ensure the throttle servo is rigidly mounted to avoid any flex by floating the servo off of the center differential. The battery box has been designed so that you can now fit either common LiPo receiver packs or Li-Ion receiver packs.

Features:

  • Nitro and Electric Parts Included
  • Improved Suspension Geometry
  • Flex Tune Suspension Arms
  • Wider 3mm Chassis
  • Larger Pinion Bearing
  • Cab Forward Style Body
  • Chassis Side Guards
  • Large Footprint Nitro Engine Mount
  • One Piece Electric Motor Mount
  • Adjustable Caster Blocks
  • Bleeder Shock Caps
  • Balanced Chassis
  • Ackerman Adjustable Draglink Steering Rack
  • Machined Aluminum Shock Towers
  • Better Diff Access
  • Sway Bar System
  • Equalized Driveline
  • Updated Radio Tray
  • Optimized Shocks
  • Ball Bearing Throttle and Brake Actuator
  • Large Bearing Spindles and Carriers
  • Shorter Wheelbase
  • LiPo/LiIon Compatible Battery Box