See: SWORKz 

SWORKz have introduced the new S12-2 2WD buggy kit. The geometry of the S12-2 provides optimized corner speed with easy handling on carpet and very high grip tracks. The S12-2 features a T7075 hard anodized and lightened aluminium chassis with a layout that allows up to 6 different battery positions. The chassis flex can be changed by adjusting the side guards. The kit comes with a 4mm carbon fibre front shock tower and a completely new designed front C-Hub geometry. Adjustable Ackermann plate and carbon fibre steering plates are already in the kit too. The S12-2 features new angled lower arms that provide a lower shock position which leads to a lower center of gravity.

The kit is equipped with a quick release system for the differential, which can be mounted in 3 different positions. The rear lower arms are angled and the rear shock tower has got different height positions while the weight of the gearbox is optimized with a perfect relation between size and strength. The rear shock tower is made of high-quality carbon fiber and the wing mount holder, height and angle of the wing can be adjusted. The rear width of the S12-2 can be changed through rear hubs and rear CVD modularity.

The SWORKz S12-2 comes with a front sway bar and a completely new developed rear sway bar holder system. The 2-pad slipper comes with hard-coated plates, high temperature resistant pads and a spur gear protection with engraved SWORKz logo. The shocks are made with the lowest tolerances possible. Shock bodies and emulsion shock caps are hard-coated while the shafts come Teflon coated to give the smoothest function. Black Line springs with a new designed, rotation protected spring holder come as standard in the SWORKz S12-2. The new S12-2 body has been tested to provide the best aerodynamic behavior. The SWORKz development team focused on using materials, corresponding to the highest quality standards, when designing the car.

Features:

  • T7075 hard anodized & lightend aluminium chassis
  • Adjustable flex system with various sideguards
  • 6 different battery positions
  • 4mm Carbon shock tower
  • New C-Hub geometry
  • Changeable Ackerman plate
  • Carbon steering plates
  • Front sway bar
  • Super light anodized front wheel axles
  • Front wing mount
  • Front aluminium toe in plate
  • Front lower arms in angled design
  • Easy adjustable Ackerman plate
  • Adjustable differential position
  • Quick differential release system
  • Lower shock position design with adjustable shock tower position
  • Adjustable rear wing height
  • Adjustable rear wing angle
  • Rear width adjustable with hubs included length adjustable CVD
  • Fully adjustable square aluminum toe in plate „SWORKz“ engraved
  • New designed rear sway bar holder
  • Rear wheel hex hard anodized
  • Rear Carbon Shock tower
  • Super light CAD optimized gearbox
  • 2 Pad Slipper System with hard anodized plates
  • Slipper Anti-Clock rotation adjustment
  • High temperatur resistant slipper pads
  • Spur gear protection with laser Logo
  • Aluminium emulsion shock cap system
  • Unique designed shock studs screws
  • Hard anodized stock studs
  • Black line shock spring
  • Rotation protected spring holder
  • Teflon hard-coated shock shaft
  • Hard-coated shock body
  • 6 Ball bearings servo system
  • Quick release electronic plate
  • Battery pad included
  • Balanced motor position
  • Body shell with optimized aerodynamic design