See: Schelle Racing Innovations

Coming soon from Schelle Racing Innovations are two sets of ball bearings and a set of titanium screws for the Team Associated B74. The ball bearings are available in two sets, Onyx Pro and Hybrid Ceramic Pro. Onyx Pro is the newest upgraded lineup of premium chrome steel bearings with low-drag lubrication and metal shields. The Onyx Pro is a performance racing bearing that is a small fraction in drag below Ceramic, yet less than half the cost. Schelle use hardened Chrome Steel races, not stainless which is a softer steel intended to inhibit rust for marine use.

Features:

  • Precision manufactured to ABEC-3 Standards, hardened Chrome Steel races for maximum durability and metal shields wherever possible to reduce drag.
  • Lubed with multi-National Champion Schelle Black Diamond Bearing Oil
  • Ideal replacements for racers who want to win without breaking the bank on full ceramics.
  • 14 pcs. Metal Shielded. 4 pcs 5x12mm are rubber shield due to the relative scarce use of this size in the industry, it was not immediately available in metal shield.

The high-RPM gearboxes is where the Hybrid Ceramic Pro bearings give maximum benefit. Schelle have also found the bearings they feel have the maximum benefit to run on the drive axles. The 4 axles roll on Onyx Pro premium chrome steel bearings with low-drag lubrication and metal shields. The Schelle Hybrid set has been tested extensively in Spec racing by Schelle owner and accomplished racer Kurt Wenger. The brand use hardened chrome steel races, not stainless which is a softer steel intended to inhibit rust for marine use.

Features:

  • Precision manufactured to ABEC-3 Standards, hardened Chrome Steel races for maximum durability and metal shields wherever possible to reduce drag.
  • Lubed with multi-National Champion Schelle Black Diamond Bearing Oil
  • Ideal replacements for racers who want to win without breaking the bank on full ceramics.
  • 10 pcs. CeramicBlack Diamond, 4 pcs. Metal Shielded Onyx Pro. 4 pcs 5x12mm are rubber shield due to the relative scarce use of this size in the industry, it was not immediately available in metal shield.

The Schelle premium titanium screws are made of Grade 5 titanium alloy (commonly known as 6Al-4V) with a bright machined finish to give your car that pure racing look. Unlike Grade 2, the Grade 5 Titanium alloy is the most desirable, giving 40% lighter weight and corrosion resistance compared to steel. The Schelle B74 upper set of 69 titanium screws strategically removes kit steel screws from up high above the chassis, which lowers the CG and improves handling. In addion, Schelle have included stainless steel button head screws to complete the look and keep the cost reasonable. The17 center spine screws along with the battery strap adjust screws also included in stainless. All chassis bottom screws are not included in this set. M3 screws only (no swaybars or set screws, no motor screws).

Titanium upper screw set:

  • Premium Grade 5 titanium alloy screws with bright machined finish.
  • 69 pcs. set comes grouped by length. 17 pcs stainless steel screws included for center spine.
  • 18g weight savings (2/3 oz). The other improvement of Schelle Ti screws is 1) no rust 2) sharp threads, will not unscrew 3) oversize deep 2mm hex
  • Set packaged in poly bags sealed by length.