See: Team Powers International

Coming soon from Team Powers International is the Radon Pro V3 speed controller. The Radon Pro V3 is based on the Radon Pro V2 and features improvements such as a 6V/7.4V selection with max ~5A BEC output that can support HV servo(maximize the servo speed by ~20%), new On/Off plastic switch & black BEC wire with better outlook appearance, a 25mm/30mm fan mount support, high density and soften 12AWG wire with lower resistance and it can tolerate higher cut off temperature. Also the Radon Pro V3 is smaller in size and 10% weight lighter than Radon Pro V2.


  • Ultra-smooth, Precise Throttle and Braking Control
  • Compatible with Sensored/Sensorless Brushless Motors
  • Data Analysis Capability(RPM, Low voltage and ESC temperature)
  • Radon-PC link connect with PC Interface for Advanced Programming and Updating
  • Easily Programming through the Program card(not included in the package)
  • Built-in one touch On/Off switch with LED
  • Bulit-in Low voltage cut-off, Overheat protection and signal loss protection


  • Controls: Forward/Brake/Reverse
  • Input Voltage: 2S-3S lipo
  • BEC: 6V/7.4V selection/max ~5A
  • Motor Limit: 4.5T or over
  • Max current: ~180A per phase
  • Size: ~38x30x19mm
  • Weight: ~41.5g


  • 6V/7.4V selection
  • 1kHz, 2kHz, 4kHz, 8kHz & 16kHz Throttle & Brake Frequceny selection
  • Having new RPM lock function that can vary the overall power band to the motor
  • With more linear booster and turbo function